Keywords

From Phaserwiki
Revision as of 12:41, 30 June 2009 by WikiSysop (talk | contribs) (Initialization from almanac)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Most keywords only refer to a single parameter, and if used multiple times, the parameter will take the last value input. Some keywords are meaningful when entered multiple times. The order may or may not be important.

User1.gif Prime Keywords

User2.gif Additional Keywords

Expert.gif Expert Keywords

Developer.gif Developer Keywords

See also: Python Functions

User1.gifATOM

ATOM CRYSTAL <XTALID> PDB <FILENAME> SCATTERING <ATOMTYPE>
Definition of atom positions using a pdb file. The scattering type can be changed (for example, for SHELXD which always outputs coordinates as sulphur).
ATOM CRYSTAL <XTALID> HA <FILENAME>
Definition of atom positionsusing a ha file (from RANTAN, MLPHARE etc.).
ATOM CRYSTAL <XTALID> [ELEMENT|CLUSTER] <TYPE> [ORTH|FRAC] <X Y Z> OCC <OCC>
Minimal definition of atom position
ATOM CRYSTAL <XTALID> [ELEMENT|CLUSTER] <TYPE> [ORTH|FRAC] <X Y Z> OCC <OCC> [ ISOB <ISOB> | ANOU <HH KK LL HK HL KL> | USTAR <HH KK LL HK HL KL>] FIXX [ON|OFF] FIXO [ON|OFF] FIXB [ON|OFF] BSWAP [ON|OFF] LABEL <SITE_NAME>
Full definition of atom position. B-factor defaults to isotropic and Wilson B-factor if not set and setATOM_BFACTOR_WILSON is used (the default).
ATOM CHANGE BFACTOR WILSON [ON|OFF]
Reset all atomic B-factors to the Wilson B-factor
ATOM CHANGE SCATTERER [ON|OFF]
Reset all atomic scatterers
ATOM SCATTERER <SCATTERER>
Element (or cluster) type to which all scatterers will be changed

Expert.gifBFACTOR

BFACTOR WILSON [ON|OFF]
Toggle to use the Wilson restraint on the isotropic component of the atomic B-factors.
BFACTOR SPHERICITY [ON|OFF]
Toggle to use the sphericity restraint on the anisotropic B-factors .
BFACTOR SIGWILSON <SIGMA>
The sigma of the Wilson restraint.
BFACTOR SIGSPHERICTY <SIGMA>
The sigma of the sphericity restraint.
  • Default: BFACTOR WILSON ON
  • Default: BFACTOR SPHERICITY ON
  • Default: BFACTOR SIGWILSON 5
  • Default: BFACTOR SIGSPHERICITY 5

Expert.gifBINS

BINS {MIN <L>} {MAX <H>} {WIDTH <W>} {CUBIC <A B C>}
The binning of the data. L = minimum number of bins, H = maximum number of bins, W = width of the bins in number of reflections, A B C are the coefficients for the binning function A(S*S*S)+B(S*S)+CS where S = (1/resolution). If N is given then the values of L and H are ignored.
  • Constraint: CUBIC coefficients restricted to monotonically increasing function: A >0, B >0, C >0 and either (a) A=B=0 or (b) A=0 or (c) B=0
  • Default: BINS MIN 6 MAX 50 WIDTH 500 CUBIC 0 1 0

Expert.gifBOXSCALE

BOXSCALE <BS>
Scale for box for calculating structure factors. The ensembles are put in a box equal to (extent of molecule)*BS.
  • Constraint: BS > 2.4
  • Default: BOXSCALE 4

Expert.gifCELL

CELL <A B C ALPHA BETA GAMMA>
Unit cell dimensions
Constraint: A>0,B>0,C>0,ALPHA>0,BETA>0,GAMMA>0
  • Default: Cell read from MTZ file

Expert.gifCLMN

CLMN SPHERE <SPHERE>
SPHERE is the radius for the decomposition of the Patterson in Ångstroms. Default value is twice the mean radius of the ENSEMBLE.
CLMN LMIN <LMIN>
Lower limit of L values.
CLMN LMAX <LMAX>
Upper limit of L values. The largest L value used in the calculation is the minimum of LMAX and 2π * SPHERE/dmin.
  • Constraint: SPHERE>5
  • Constraint: LMAX>LMIN
  • Constraint: LMIN>0
  • Default: CLMN LMIN 4
  • Default: CLMN LMAX 100

User1.gifCLUSTER

CLUSTER ID <ID> PDB <PDBFILE>
Sample coordinates for a cluster compound for experimental phasing. The ID must be two characters long and not one of the periodic table element symbols.

User1.gifCOMPOSITION

COMPOSITION BY [AVERAGE|SOLVENT|ASU]
Alternative way of defining composition,by average solvent fraction for crystals (50%)
COMPOSITION PERCENTAGE <SOLVENT>
Composition entered by solvent content.
COMPOSITION PROTEIN [ MW <MW> |SEQUENCE <FILE> | NRES <NRES> | STR <STR> ] NUMBER <NUM>
Composition of the crystals. The number of copies NUM of molecular weight MW or SEQ given in fasta format (in a file FILE) or number of residues <NRES> or a sequence string (no spaces) of protein in the asymmetric unit.
COMPOSITION NUCLEIC [ MW <MW> |SEQUENCE <FILE> | NRES <NRES> | STR <STR> ] NUMBER <NUM>
Composition of the crystals. The number of copies NUM of molecular weight MW or SEQ given in fasta format (in a file FILE) or number of residues <NRES> or a sequence string (no spaces) of nucleic acid in the asymmetric unit.
COMPOSITION ATOM <TYPE> NUMBER <NUM>
Add NUM copies of an atom (usually a heavy atom) to the composition
  • Constraint: MW>0
  • Default: COMPOSITION SOLVENT 0.5

User1.gifCRYSTAL

CRYSTAL <XTALID> DATASET <WAVEID> LABIN Fpos =<F+> SIGFpos=<SIG+> Fneg=<F-> SIGFneg=<SIG->
Columns of MTZ file to read for this (anomalous) dataset

User2.gifDEBUG

DEBUG [ON|OFF]
Extra verbose output for debugging
  • Default: DEBUG OFF

User2.gifEIGEN

EIGEN [ READ <EIGENFILE> | WRITE [ON|OFF] ]
Read or write a file containing the eigenvectors and eigenvalues. If reading, the eigenvalues and eigenvectors of the atomic Hessian are read from the file generated by a previous run, rather than calculated. This option must be used with the job that generated the eigenfile and the job reading the eigenfile must have identical (or default) input for keyword NMAMethod. Use WRITe to control whether or not the eigenfile is written when not using the READ mode.
  • Default: EIGEN WRITE ON

User1.gifENSEMBLE

ENSEMBLE <MODLID> PDB <PDBFILE> [RMS <RMS>|IDENTITY <ID>] {PDB <PDBFILE> [RMS <RMS>|IDENTITY <ID>] }…
The names of the PDB files used to build the ENSEMBLE, and either the expected RMS deviation of the coordinates to the "real" structure or the percent sequence identity with the real sequence.
ENSEMBLE <MODLID> MAP <MTZFILE> F=<F> PHI=<PHI> EXTENT <EX EY EZ> RMS <RMS> CENTRE <CX CY CZ> PROTEIN MW <PMW> NUCLEIC MW <NMW>
An ENSEMBLE defined from a map (via an mtz file). The molecular weight of the object the map represents is required for scaling. The effective RMS coordinate error is needed to judge how the map accuracy falls off with resolution. The extent is needed to determine reasonable rotation steps, and the centre is needed to carry out a proper interpolation of the molecular transform. The extent and the centre are both given in Ångstroms.
ENSEMBLE <MODLID> FRACTION <FRAC_SCAT>
Fraction scattering of ensemble entered directly rather than calculated from composition
  • Constraint: ID=%
ENSEMBLE <MODLID> HKL <MTZFILE> SCATTERING <SCAT> EXTEnt <EX EY EZ> PR <P1 P2 P3 P4 P5 P6 P7 P8 P9> PT <TX TY TZ>
This option can be used to read back a molecular transform computed in an earlier Phaser job run in the MR_ENS mode. May be useful if the spherical harmonic decomposition is very long. This can only be used when repeating the search for a component of the asymmetric unit with no (or the same) known fixed structure as part of the search.
ENSEMBLE <MODLID> BINS {MIN <L>} {MAX <H>} {NUM <N>} {WIDTH <W>} {CUBIC <A B C>}
Bins for the MODLID
  • Default: ENSEMBLE <MODLID> BINS MIN 5 MAX 200 WIDTH 1000 CUBIC 0 1 0

Developer.gifFFTS

FFTS MIN [ATOMS_MIN] MAX [ATOMS_MAX]
The minimum and maximum number of atoms of the range between which direct summation and fft methods are tested to see which is faster for structure factor and gradient calcuation (for this unit cell and resolution). For a number of atoms below ATOMS_MIN direct structure factor calculation is always used, and for a number of atoms above ATOMS_MAX ffts are always used for the structure factor calculation and the gradient calculations. Direct summation is always used for the curvatures. Use FFTS MIN 0 MAX O to always use ffts.
  • Default: FFTS MIN 20 MAX 80

Developer.gifGAUSS

GAUSS INTEGRATION [VARIABLE | FIXED]
Determine the number of angular steps in the integration by the variance of the function
GAUSS STEP <STEP>
Number of steps in angular integration of function if FIXED number of points
  • Default: GAUSS INTEGRATION VARIABLE

User1.gifHAND

HAND [ON|OFF|BOTH]
Toggle for whether or not to use other hand of space group, or both hands, in experimental phasing
  • Default: HAND OFF

User1.gifHKLIN

HKLIN <FILENAME>
The mtz file containing the data

User2.gifHKLOUT

HKLOUT [ON|OFF]
Flags for output of an mtz file containing the phasing information
  • Default: HKLOUT ON

User1.gifJOBS

JOBS <NUM>
Number of processors to use in parallelized sections of code
  • Default: JOBS 2

User2.gifKEYWORDS

KEYWORDS [ON|OFF]
Write Phaser script file
Default: KEYWORDS ON

User1.gifLABIN

LABIN F = <F> SIGF = <SIGF>
Columns in mtz file. F must be given. SIGF should be given but is optional

User2.gifLLGCOMPLETE

LLGComplete COMPLETE [ON|OFF]
Toggle for structure completion by log-likelihood gradient maps
LLGComplete [ELEMENT|CLUSTER] <TYPE>
Atom type(s) to be used for log-likelihood gradient completion. If more than one element is entered for log-likelihood gradient completion, the atom type that gives the highest Z-score for each peak is selected.
LLGComplete REAL [ON|OFF]
Complete the model using a purely real scatterer
LLGComplete ANOMALOUS [ON|OFF]
Complete the model using a purely imaginary (anomalous) scatterer
LLGComplete CLASH DEFAULT [ON|OFF]
LLGComplete CLASH DISTANCE <CLASH>
Minimum distance between atoms in log-likelihood gradient maps (default determined by resolution)
LLGComplete SIGMA <Z>
Z-score (sigma) for accepting peaks as new atoms in log-likelihood gradient maps
LLGComplete NCYC <NMAX>
Maximum number of cycles of log-likelihood gradient structure completion. By default, NMAX is 50, but this limit should never be reached, because all features in the log-likelihood gradient maps should be assigned well before 50 cycles are finished. This keyword should be used to reduce the number of cycles to 1 or 2.
LLGComplete MAPS [ON|OFF]
  • Default: LLGCOMPLETE COMPLETE OFF
  • Default: LLGCOMPLETE CLASH AUTO ON
  • Default: LLGCOMPLETE SIGMA 6
  • Default: LLGComplete NCYC 50

Expert.gifMACANO

MACANO ANISOTROPIC [ON|OFF] BINS [ON|OFF] SOLK [ON|OFF] SOLB [ON|OFF] {NCYCle <NCYC>} {MINIMIZER [BFGS|NEWTON|DESCENT]}
Macrocycles for the refinement of SigmaN in the anisotropy correction
MACANO OFF
Turns off the anisotropy correction
  • Default: MACANO ANIS ON BINS ON SOLK OFF SOLB OFF NCYC 50 MINIMIZER NEWTON

Expert.gifMACMR

MACMR ROT [ON|OFF] TRA [ON|OFF] {NCYCLE <NCYC>} {MINIMIZER [BFGS|NEWTON|DESCENT]}
Molecular replacement refinement macrocycle. The macrocycles are performed in the order that they are entered
MACMR OFF
Turn off molecular replacement refinement
  • Default:
    • MACMR ROT ON TRA ON NCYC 50 MINIMIZER BFGS

Expert.gifMACSAD

MACSAD K [ON|OFF] B [ON|OFF] SIGMA [ON|OFF] XYZ [ON|OFF] OCCupancy [ON|OFF] BFACtor [ON|OFF] FDP [ON|OFF] SA [ON|OFF] SB [ON|OFF] SP [ON|OFF] SD [ON|OFF] {NCYCle <NCYC>} {MINIMIZER [BFGS|NEWTON|DESCENT]}
SAD refinement macrocycle. The macrocycles are performed in the order that they are entered
MACSAD OFF
Turn off SAD refinement
  • Default:
    • MACSAD K OFF B OFF SIGMA OFF XYZ OFF OCC ON BFAC OFF FDP ON SA OFF SB OFF SP OFF SD OFF NCYC 50 MINIMIZER BFGS
    • MACSAD K OFF B OFF SIGMA OFF XYZ ON OCC ON BFAC ON FDP ON SA OFF SB OFF SP ON SD ON NCYC 50 MINIMIZER BFGS
  • There are additional undocumented keywords that will crash phaser but are useful for debugging - see code for details'

User1.gifMODE

MODE [ ANO | CCA | NMA | MR_AUTO | MR_FRF | MR_FTF | MR_BRF | MR_BTF | MR_RNP | MR_LLG | MR_PAK | EP_AUTO | EP_SAD]
The mode of operation of Phaser. The different modes are described in Phaser-2.2: Modes

Developer.gifMUTE

MUTE [ON|OFF]
Toggle for running in "silent" mode, with no summary, logfile or verbose output written to "standard output".
  • Default: MUTE OFF

Expert.gifNMAMETHOD

NMAMETHOD OSCILLATORS [RTB | CA | ALL ]
Define the atoms used for the normal mode analysis. RTB uses the rotation-translation block method, CA uses C-alpha atoms only to determine the modes, and ALL uses all atoms to determine the modes (only for use on very small molecules, less than 250 atoms).
NMAMETHOD MAXBLOCKS <MAXBLOCKS>
MAXBLOCKS is the number of rotation-translation blocks for the RTB analysis.
NMAMETHOD NRES <NRES>
For the RTB analysis, by default NRES is calculated so that it is as high as it can be without reaching MAXBlocks.
  • Default: NMAMETHOD RTB MAXBLOCKS 250
NMAMETHOD RADIUS <RADIUS>
Elastic Network Model interaction radius (Angstroms)
NMAMETHOD FORCE <FORCE>
Elastic Network Model force constant
  • Default: NMAMETHOD FORCE 1

User2.gifNMAPDB

NMAPDB PERTURB [RMS| DQ]
Perturb the structure by rms devitations along the modes, or by set dq increments
NMAPDB MODE <M1> {MODE <M2>…}
The MODE keyword gives the mode along which to perturb the structure. If multiple modes are entered, the structure is perturbed along all the modes AND combinations of the modes given. There is no limit on the number of modes that can be entered, but the number of pdb files explodes combinatorially.
NMAPDB COMBination <NMAX>
Controls how many modes are present in any combination.
NMAPDB RMS STEP <RMS>
Increment in rms Ångstroms between pdb files to be written.
NMAPDB RMS CLASH <CLASH>
NMAPDB RMS STRETCH <STRETCH>
NMAPDB RMS MAX <MAXRMS>
The structure will be perturbed along each mode until either the C-alpha atoms clash with (come within CLASH Ångstroms of) other C-alpha atoms, the distances between C-alpha atoms STRETCH too far (note that normal modes do not preserve the geometry) or the MAXRMS deviation has been reached.
NMAPDB RMS DIRECTION [FORWard|BACKward|TOFRo]
The structure is perturbed either forwards or backwards or to-and-fro (FORWARD|BACKWARD|TOFRO) along the eigenvectors of the modes specified.
NMAPDB DQ <DQ1> {DQ <DQ2>…}
Alternatively, the DQ factors (as used by the Elnemo server (K. Suhre & Y-H. Sanejouand, NAR 2004 vol 32) ) by which to perturb the atoms along the eigenvectors can be entered directly.
  • Default: NMAPDB MODE 7
  • Default: NMAPDB COMBINATION 3
  • Default: NMAPDB PERTURB RMS
  • Default: NMAPDB RMS STEP 0.3
  • Default: NMAPDB RMS STRETCH 10.0
  • Default: NMAPDB RMS CLASH 2.0
  • Default: NMAPDB RMS MAXRMS 0.5
  • Default: NMAPDB RMS DIRECTION TOFRO

Developer.gifNORMALIZATION

NORMALIZATION BINS <B1 B2 ...> ANISO <HH KK LL HK HL KL> SOLK <SOLK> SOLB <SOLB>
The normalization factors that correct for anisotropy in the data

Expert.gifOUTLIER

OUTLIER REJECT [ON|OFF]
Reject low probability data outliers
OUTLIER PROB <PROB>
Cutoff for rejection of low probablity outliers
  • Default: OUTLIER REJECT ON PROB 0.000001

User2.gifPACK

PACK [ BEST | ALLOW | ALL ]
Allow the best packing solutions provided the total number of clashes does not exceed ALLOWED_CLASHES; or allow all solutions that pack with number of C-alpha clashes within ALLOWED_CLASHES Ångstroms; or allow all solutions. If the model is RNA or DNA, phosphate (P) and carbon atoms (C3* and C4*) in the phosphate backbone, and nitrogen atoms in the bases are taken as the marker atoms for clashes. The atom names must start in column 14 (leaving one space at the beginning of the field), and the single-letter residue names must be right-justified (i.e. in column 20).
PACK CUTOFF <ALLOWED_CLASHES>
Limit on total number of clashes
PACK QUICK [ON|OFF]
Packing check stops when ALLOWED_CLASHES or MAX_CLASHES is reached
Default: PACK BEST CUTOFF 10 QUICK ON
PACK DISTANCE <CLASH_DISTANCE>
Distance within which C-alpha atoms clash given by CLASH_DISTANCE Ångstroms. If the model is RNA or DNA, phosphate and carbon atoms in the phosphate backbone, and nitrogen atoms in the bases are taken as the marker atoms for clashes
  • Default: PACK DISTance 3.0

User1.gifPARTIAL

PARTIAL PDB <PDBFILE> [RMS <RMS>|IDENTITY <ID>]
The partial structure for SAD refinement
  • Constraint: ID=%

User2.gifPEAKS

PEAKS [ROT|TRA] SELECT [ 1PERCENT | 2SIGMA | 3NUMBER | 4ALL] CUTOFF <CUTOFF>
Peaks for the rotation function (ROT) or translation function (TRA) satisfying selection criteria are saved
1Select peaks by taking all peaks over CUTOFF percent of the difference between the top peak and the mean value.
2Select peaks by taking all peaks with a Z-score greater than CUTOFF
3Select peaks by taking top CUTOFF
4Select all peaks
PEAKS [ROT|TRA] CLUSTER [ON|OFF]
Toggle for CLUSTER selects clustered peaks
  • Default: PEAKS ROT SELECT PERCENT CUTOFF 75
  • Default: PEAKS TRA SELECT PERCENT CUTOFF 75
  • Default: PEAKS ROT CLUSTER ON
  • Default: PEAKS TRA CLUSTER ON

User2.gifPERMUTATIONS

PERMUTATIONS [ON|OFF]
Toggle for whether the order of the search set is to be permuted.
  • Default: PERMUTATIONS OFF

Expert.gifPTGROUP

PTGROUP COVERAGE <COVERAGE>
Percentage coverage for two sequences to be considered in same pointgroup
PTGROUP IDENTITY <IDENTITY>
Percentage identity for two sequences to be considered in same pointgroup
PTGROUP RMSD <RMSD>
Percentage rmsd for two models to be considered in same pointgroup
PTGROUP TOLERANCE ANGULAR <ANG>
Angular tolerance for pointgroup
PTGROUP TOLERANCE SPATIAL <DIST>
Spatial tolerance for pointgroup

User2.gifPURGE

PURGE SELECT [ON|OFF]
Toggle for whether to purge the solution list from the translation function and the refinement and phasing steps (when searching multiple space groups) according to the best solution found so far.
PURGE PERCENT <PERC>
PERC is the percent of the difference between the top solution and the mean at which to purge the solutions.
  • Default: PURGE SELECT ON PERCENT 75

Expert.gifRESCORE

RESCORE [ROT|TRA] [ON|OFF]
Toggle for rescoring of fast rotation function (ROT) or fast translation function(TRA) search peaks.
  • Default: RESCORE ROT ON
  • Default: RESCORE TRA ON

Expert.gifRESHARPEN

RESHARPEN PERCENTAGE <PERC>
Perecentage of the B-factor in the direction of lowest fall-off (in anisotropic data) to add back into the structure factors F_ISO and FWT and FDELWT so as to sharpen the electron density maps
  • Default: RESHARPEN PERCENT 100

User2.gifRESOLUTION

RESOLUTION <HIRES> <LORES>
Resolution range in Ångstroms. If only one limit is given, it is the high resolution limit; otherwise the limits can be in either order.
Constraint: HIRES>0,LORES>0
RESOLUTION AUTO <HIRES> <LORES>
Resolution range in Ångstroms for high resolution refinement in MR_AUTO mode. If only one limit is given, it is the high resolution limit; otherwise the limits can be in either order.
  • Constraint: HIRES>0
  • Constraint: LORES>0
  • Default: setHIRES(3) for rotation and translation functions

User1.gifROOT

ROOT <FILEROOT>
Root filename for output files (e.g. FILEROOT.log)
  • Default: ROOT PHASER

User2.gifROTATE

ROTATE VOLUME [FULL|AROUND] EULER <A B G> RANGE <RANGE>
Sample all unique angles (FULL) or restrict the search to the region of +/- RANGE degrees around orientation given by EULER
  • Constraint: RANGE>0
  • Default: ROTATE FULL

Expert.gifSAMPLING

SAMPLING [ROT|TRA]
Sampling of search given in degrees for a rotation search and Ångstroms for a translation search. Sampling for rotation search depends on the mean radius of the Ensemble and the high resolution limit (dmin) of the search.
  • Constraint: SAMP>0
  • Default: SAMP = 2*atan(dmin/(4*meanRadius)) (MODE = MR_BRF or MR_FRF)
  • Default: SAMP = dmin/5; (MODE = MR_BTF)
  • Default: SAMP = dmin/4; (MODE = MR_FTF)

User2.gifSCATTERING

SCATTERING ELEMENT <ATOMTYPE> FP=<FP> FDP=<FDP> FIX [ON|OFF]
Measured scattering factors for a given atom type, from a fluorescence scan
SCATTERING CLUSTER <ATOMTYPE> FP=<FP> FDP=<FDP> FIX [ON|OFF]
Measured scattering factors for a given cluster, from a fluorescence scan.
SCATTERING RESTRAIN [ON|OFF]
use Fdp restraints
SCATTERING SIGMA [ON|OFF]
Fdp restraint sigma
  • Default: SCATTERING SIGMA 0.01
  • Default: SCATTERING Restrain ON

User1.gifSEARCH

SEARCH ENSEMBLE <MODLID> {OR ENSEMBLE <MODLID>}… NUMBER <NUM>
The ENSEMBLE to be searched for in a rotation search or an automatic search. When multiple ensembles are given using the OR keyword, the search is performed for each ENSEMBLE in turn. When the keyword is entered multiple times, each SEARCH keyword refers to a new component of the structure. If the component is present multiple times the sub-keyword NUMber can be used (rather than entering the same SEARCH keyword NUMber times).
SEARCH ORDER AUTO [ON|OFF]
Search in the "best" order as estimated using estimated rms deviation and completeness of models
  • Default: NUM=1
  • Default: SEARCH ORDER AUTO ON

User1.gifSGALTERNATIVE

SGALTERNATIVE SELECT [ALL|HAND|LIST|NONE]
Selection of alternative space groups to test in translation functions. ALL tests all possible space groups, HAND tests the given space group and its enantiomorph and LIST tests the space groups listed with TEST <SG>.
SGALTERNATIVE TEST <SG>
Alternative space groups to test.
SGALTERNATIVE SORT [ON|OFF]
Sort alternative space group list in order of frequency of occurrence

Expert.gifSOLPARAMETERS

SOLPARAMETERS FSOL <FSOL> BSOL <BSOL>
Change solvent parameters for Sigma(A) curves. The results are not terribly sensitive to these parameters, which affect only lower resolution data.
  • Constraint: 0<FSOL<1, BSOL>0, FSOL<BSOL
  • Default: SOLPARAMETERS FSOL 0.95 BSOL 300

User1.gifSOLUTION

SOLUTION SET <ANNOTATION>
Start new set of solutions
SOLUTION 6DIM ENSEMBLE <MODLID> EULER <A B G> [ORTH|FRAC] <X Y Z> FIXR [ON|OFF] FIXT [ON|OFF] FIXB [ON|OFF] BFAC <BFAC>
This keyword is repeated for each known position and orientation of a ENSEmble ID. A B G are the Euler angles and X Y Z are the translation elements, expressed either in orthogonal Angstroms (ORTH) or fractions of a cell edge (FRAC). The input ensemble is transformed by a rotation around the origin of the coordinate system, followed by a translation.
SOLUTION TRIAL ENSEMBLE <MODLID> EULER <A B G> {SCORE <SCORE>}
Rotation List for translation function

Developer.gifSORT

SORT [ON|OFF]
Sort the reflections into resolution order upon reading MTZ file, for performance gain in molecular replacement
  • Default: SORT ON

User1.gifSPACEGROUP

SPACEGROUP <SG>
Space group may be altered from the one on the MTZ file to a space group in the same point group. The space group name or number can be given e.g. P 21 21 21 or 19. l.
  • Default: Read from MTZ file

Developer.gifSUITE

SUITE CCP4
CCP4 style output
SUITE PHENIX
Phenix style output
SUITE CIMR
CIMR style output
  • Default depends on distribution (CCP4 or Phenix)

Expert.gifTARGET

TARGET FRF [LERF1|LERF2|CROWTHER]
Target function for fast rotation searches (2)
TARGET FTF [LETF1|LETF2|LETFL|LETFQ|CORRelation]
Target function for fast translation searches (3)
  • Default: TARGET FRF LERF1
  • Default: TARGET FTF LETF1

User1.gifTITLE

TITLE <TITLE>
Title for job
  • Default: TITLE [no title given]

User2.gifTOPFILES

TOPFILES <NUM>
Number of top pdbfiles or mtzfiles to write to output.
Default: TOPFILES 1

User2.gifTRANSLATE

TRANSLATE VOLUME FULL
Search volume for brute force translation function. Cheshire cell or Primitive cell volume.
TRANSLATE VOLUME LINE [ORTH|FRAC] START <XS YS ZS> END <XE YE ZE>
Search volume for brute force translation function. Search along line.
TRANSLATE VOLUME REGION [ORTH|FRAC] START <XS YS ZS> END <XE YE ZE>
Search volume for brute force translation function. Search region.
TRANSLATE VOLUME AROUND [ORTH|FRAC] POINT <X Y Z> RANGE <RANGE>
Search volume for brute force translation function. Search within +/- RANGE Ångstroms (not fractional coordinates, even if the search point is given as fractional coordinates) of a point <X Y Z>.
  • Default: TRANSLATE VOLUME FULL

Developer.gifVARSAD

VARSAD [ {K <N>} | {B <N>} | {SIGMA <N>} | {SA <B1 B2 …>} | {SB <B1 B2 …>} | {SP <B1 B2 …>} | {SD <B1 B2 …>} | {PK <N>} | {PB <N>}]
SAD variance parameters SA and SB (the real and imaginary components of Sigma Minus), SP (Sigma Plus) and SD (Sigma Delta) by resolution bin, the overall scale (K) and B-factor (B) for the anomalous scatterer model, the overall scale (PK) and B-factor (PB) for the partial structure (if given), and sigma-scale (SIGMA).

User2.gifVERBOSE

VERBOSE [ON|OFF]
Toggle to send verbose output to log file.
  • Default: VERBOSE OFF

User1.gifWAVELENGTH

WAVELENGTH <LAMBDA>
The wavelengh at which the SAD dataset was collected

User2.gifXYZOUT

XYZOUT [ON|OFF]
Toggle for output coordinate files.
  • Default: XYZOUT OFF (Rotation functions)
  • Default: XYZOUT ON (all other relevant modes)